Actually, there is only one sata connexion, not two. Some of these links include affiliate codes that help pay for this blog. Unfortunately, the file is quite different. After renaming the udev rules file the disk will show up. However, I can confirm that no, absolutely no bug here, everything working exactly as should. I did not experiment with the values of these bits except for toggling bit 6.
|Date Added:||24 March 2014|
|File Size:||34.20 Mb|
|Operating Systems:||Windows NT/2000/XP/2003/2003/7/8/10 MacOS 10/X|
|Price:||Free* [*Free Regsitration Required]|
ExpressCard SATA Adapters: The Lesser of Two Evils
Something like “Data error on USB device. After that there’s a similar uevent-probe-signal block for sdb1.
Invalid argument Failed to dump disk data: The JMicron is still positive. I have the feeling that there jmicdon another affected controller here, since Scott’s original report didn’t mention a JMicron controller anywhere.
I am experiencing similar problems on Ubuntu karmic with the latest updates and kernel 2. The latest upload of libatasmart fixes the issue for me. Then I can check the actual status, the total amount of written data and correct this.
With that, there is no such issue, the self monitoring S. No such device Dmesg log after the eject is attached.
ExpressCard SATA Adapters: The Lesser of Two Evils – Stephen Foskett, Pack Rat
Zitat von maxbox im Beitrag 13 The situation is in stall. This way I can surely confirm if there is anything to do on my side, verify if the firmware and the response of the chip is similar to the devices tested or slightly different which may open some possibilities. The USB-harddisk is not recognized and dmesg jmifron me again all this errors.
At this point in the code, register cl should contain the byte read from PCI configuration register 0xdf. I have also tried the provided 2. It was quite tricky to find out which packages had been the cause. What am I missing? Unfortunately, there is no new firmware available on StarTech’s website.
So let’s look at the timestamps. You should be able to do that right after pluggin in the drive. I uploaded a new version to Karmic with this fix cherrypicked. The choice is less than clear: Stefan Ebner jnicron Which can be found here: Sorry, the previous comment was wrong. You might also want to read these other posts Sun Jun 14 This may give information to verify what can be wrong and how things can be improved – if can and should be improved.
Trying to update JMicron Firmware in DOS, please help
I expect complete status on USB connection, usually things should work better there. Invalid argument Hm, it seems you have a very different problem than other people, the symtoms are so much different.
Here is another JMicron-chip that gives the symtoms listed above and which are fixed by disabling devicekit-disks: I ask you, for safety: Farris Goldstein [ 4: I tried modifying the option ROM to also configure register 0x to this value, but had many problems booting. The sum of all bytes in the file should be 0x These configuration registers seem to control the hardware directly.